# Snap to Place Magnetometer issue **URL:** https://community.thunkable.com/t/snap-to-place-magnetometer-issue/3045733 **Category:** Issues / Bugs **Created:** [June 6, 2024, 9:49pm UTC](https://community.thunkable.com/t/snap-to-place-magnetometer-issue/3045733 "2024-06-06T21:49:29Z") **Posts on this page:** 3 **Page:** 1
### Author: ![KaneoheKid](https://avatars.discourse-cdn.com/v4/letter/k/d07c76/32.png) [@KaneoheKid](https://community.thunkable.com/u/KaneoheKid) #### Post date: [June 6, 2024, 9:49pm UTC](https://community.thunkable.com/t/snap-to-place-magnetometer-issue/3045733/1 "2024-06-06T21:49:29Z")
I’ve noticed that some of the blocks are missing for the magnetometer. None of the Function blocks are showing up (Call X, Y, Z or Heading). Here is an example. [https://x.thunkable.com/copy/8055c0b1cb9ca361691f89be578e758e](https://x.thunkable.com/copy/8055c0b1cb9ca361691f89be578e758e) Has the functionality been removed from S2P or is it just a temporary bug? ---
### Author: ![ioannis](https://sea1.discourse-cdn.com/flex015/user_avatar/community.thunkable.com/ioannis/32/146956_2.png) [@ioannis](https://community.thunkable.com/u/ioannis) #### Post date: [June 7, 2024, 12:20pm UTC](https://community.thunkable.com/t/snap-to-place-magnetometer-issue/3045733/2 "2024-06-07T12:20:35Z")
Hello @KaneoheKid I checked your project First, connect the blocks: ![image](https://us1.discourse-cdn.com/flex015/uploads/thunkable/original/3X/f/5/f540522137d14187969c5d8395b309b8fe82cff8.png) Then test it on a mobile device ---
### Author: ![KaneoheKid](https://avatars.discourse-cdn.com/v4/letter/k/d07c76/32.png) [@KaneoheKid](https://community.thunkable.com/u/KaneoheKid) #### Post date: [June 7, 2024, 5:46pm UTC](https://community.thunkable.com/t/snap-to-place-magnetometer-issue/3045733/3 "2024-06-07T17:46:28Z")
Yes, the flux numbers come in just fine, I was wondering about the x, y, z and most importantly, the heading functions which were there previously.