# Seeking some design feedback for pop-up and strikethrough
**URL:** https://community.thunkable.com/t/seeking-some-design-feedback-for-pop-up-and-strikethrough/1617296
**Category:** Feedback
**Created:** [November 15, 2021, 9:52pm UTC](https://community.thunkable.com/t/seeking-some-design-feedback-for-pop-up-and-strikethrough/1617296 "2021-11-15T21:52:57Z")
**Posts on this page:** 9
**Page:** 1
### Author:  [@jared](https://community.thunkable.com/u/jared)
#### Post date: [November 15, 2021, 9:52pm UTC](https://community.thunkable.com/t/seeking-some-design-feedback-for-pop-up-and-strikethrough/1617296/1 "2021-11-15T21:52:57Z")
Checkout these animations and seamless cross-outs of the todo items.
Obviously, there’s a lot left to do but it’s a start. Replacing my been remixed more than 501 times!
[get it here](https://x.thunkable.com/projectPage/5e5c91ca5d0aa012e56848bd)
I’d love your feedback!
If you wanna check out the new project, be sure to open it on your phone.
[See the new project here](https://x.thunkable.com/projectPage/6192883a6eecef0010a93b6c)
https://player.vimeo.com/video/646611335?h=9ba91be4ff&app_id=122963
---
### Author:  [@tatiang](https://community.thunkable.com/u/tatiang)
#### Post date: [November 17, 2021, 10:04pm UTC](https://community.thunkable.com/t/seeking-some-design-feedback-for-pop-up-and-strikethrough/1617296/2 "2021-11-17T22:04:25Z")
This is a really nice effect! And kind of you to share it with everyone.
I’m sad I can’t replicate this in the Drag and Drop interface (there is no way to set a component’s height dynamically using blocks) but at least it works in the Snap to Place one.
There’s a little glitch on my phone when it closes the pop-up. It jumps/flickers a little bit. Not a big deal but since you asked for feedback I thought I’d mention it.
---
### Author:  [@oberon](https://community.thunkable.com/u/oberon)
#### Post date: [November 18, 2021, 3:01pm UTC](https://community.thunkable.com/t/seeking-some-design-feedback-for-pop-up-and-strikethrough/1617296/3 "2021-11-18T15:01:08Z")
Hello, this system works well on screens with very little content but when you have a lot of blocks and images etc the system is much slower to display.
I had implemented it on a dropdown a long time ago but it is not fluid.
This is a good job
---
### Author:  [@jared](https://community.thunkable.com/u/jared)
#### Post date: [November 18, 2021, 7:11pm UTC](https://community.thunkable.com/t/seeking-some-design-feedback-for-pop-up-and-strikethrough/1617296/4 "2021-11-18T19:11:49Z")
Thank you!
> [@oberon](#):
>
> uch slower to display.
> I had implemented it on a dropdown a long time ago but it is not fluid.
I’d be interested to see a screen that is slower to display.
for me, to speed things up, I simply reduce the wait time. does that not work for you?
i have this action occur on a screen that is made of at least 2,300 blocks. no issue there
[Update]
@tatiang Thank you for that feedback!
I have implemented a tiny update to the code that seems to rectify the sitch (for the most part)
[ ](https://vimeo.com/647569939)
---
### Author:  [@oberon](https://community.thunkable.com/u/oberon)
#### Post date: [November 19, 2021, 7:09pm UTC](https://community.thunkable.com/t/seeking-some-design-feedback-for-pop-up-and-strikethrough/1617296/5 "2021-11-19T19:09:17Z")
Hi @jared I try to show you this as soon as possible
---
### Author:  [@tatiang](https://community.thunkable.com/u/tatiang)
#### Post date: [November 19, 2021, 7:21pm UTC](https://community.thunkable.com/t/seeking-some-design-feedback-for-pop-up-and-strikethrough/1617296/6 "2021-11-19T19:21:19Z")
It looks really good now!
---
### Author:  [@oberon](https://community.thunkable.com/u/oberon)
#### Post date: [November 25, 2021, 4:00pm UTC](https://community.thunkable.com/t/seeking-some-design-feedback-for-pop-up-and-strikethrough/1617296/7 "2021-11-25T16:00:56Z")
Finally it does not depend on the project but rather on the support on the iphone 6 it seems is very slow when the screen performs other task at the same time.
---
### Author:  [@tatiang](https://community.thunkable.com/u/tatiang)
#### Post date: [November 28, 2021, 7:34am UTC](https://community.thunkable.com/t/seeking-some-design-feedback-for-pop-up-and-strikethrough/1617296/8 "2021-11-28T07:34:57Z")
I’m struggling to get any of the components inside of the pop up to show up. It’s probably a positioning issue but I’ve tried a few different things and only the pop up row (I know you used a column instead) appears… but at least that part works.
Any advice for getting embedded components to appear? For example the “Image pop up” or “Column2” in my components tree:
---
### Author:  [@ioannis](https://community.thunkable.com/u/ioannis)
#### Post date: [November 8, 2024, 1:14pm UTC](https://community.thunkable.com/t/seeking-some-design-feedback-for-pop-up-and-strikethrough/1617296/9 "2024-11-08T13:14:26Z")