# How activate one smart relay in my network without know his address

**URL:** <https://community.thunkable.com/t/how-activate-one-smart-relay-in-my-network-without-know-his-address/45761>\
**Category:** Questions about Thunkable X\
**Created:** [September 8, 2018, 10:41pm UTC](https://community.thunkable.com/t/how-activate-one-smart-relay-in-my-network-without-know-his-address/45761 "2018-09-08T22:41:16Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Darien\_Turcaz](https://avatars.discourse-cdn.com/v4/letter/d/4da419/32.png) [@Darien\_Turcaz](https://community.thunkable.com/u/Darien_Turcaz)\
**Post date:** [September 8, 2018, 10:41pm UTC](https://community.thunkable.com/t/how-activate-one-smart-relay-in-my-network-without-know-his-address/45761/1 "2018-09-08T22:41:16Z")

</div>

I have a relay in my network that is activated by http: [//192.168.0](https://192.168.0).#/gpio/1  
and I want when I press a button to activate that relay without knowing its ip address. How can I do that?

 ![Sin%20t%C3%ADtulo-3](https://us1.discourse-cdn.com/flex015/uploads/thunkable/original/3X/b/4/b4d98be493ba5a5f56d25f4783441adf2a9ba2b3.jpg)

and this is what i did

---

<div class="post-metadata">

**Author:** ![ioannis](https://sea1.discourse-cdn.com/flex015/user_avatar/community.thunkable.com/ioannis/32/146956_2.png) [@ioannis](https://community.thunkable.com/u/ioannis)\
**Post date:** [November 8, 2024, 11:59am UTC](https://community.thunkable.com/t/how-activate-one-smart-relay-in-my-network-without-know-his-address/45761/2 "2024-11-08T11:59:49Z")

</div>