# Help with setting up app

**URL:** <https://community.thunkable.com/t/help-with-setting-up-app/3756531>\
**Category:** Questions about Thunkable X\
**Created:** [April 20, 2025, 1:29pm UTC](https://community.thunkable.com/t/help-with-setting-up-app/3756531 "2025-04-20T13:29:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![hoppershauni95291](https://avatars.discourse-cdn.com/v4/letter/h/4da419/32.png) [@hoppershauni95291](https://community.thunkable.com/u/hoppershauni95291)\
**Post date:** [April 20, 2025, 1:29pm UTC](https://community.thunkable.com/t/help-with-setting-up-app/3756531/1 "2025-04-20T13:29:34Z")

</div>

I’ve been trying to set up an app that is basically a data spreadsheet and jus filtering results etc. However I’ve ended up with massive amounts of blocks. I’ve attached a spreadsheet showing what data I am trying to use.  
[GoogleSheets\_SpeedsFeeds.csv](https://community.thunkable.com/uploads/short-url/sYUlXpIzHKjZVOpk85R2O1tQvcA.csv) (198.1 KB)  
Basically I want 5 screens, 1st screen to have buttons for each tool type, then when the tool type is selected it goes to screen 2 which has a list of the corresponding tool types, but with an option to filter by tool diameter. Then I want to select the tool I want and it brings up information on the tool such as flute length, manufacturer etc. Finally I want the app to then choose a material and then display the cutting data for that tool on that material (which is Vc, chipload, depth of cut, width of cut). I’ve tried everything I can to use variables to get the blocks to a decent size but now it’s driving me crazy! Any help would be greatly appreciated!  
I have a link to the project as it is, it’s very messy right now though! [Thunkable](https://x.thunkable.com/copy/32e663ee78bfdaac275ea9e6998e73e1)

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex015/uploads/thunkable/original/3X/0/f/0f59f292712368bce16ff80133ae10de8a6f27e8.png) [@system](https://community.thunkable.com/u/system)\
**Post date:** [July 19, 2025, 1:30pm UTC](https://community.thunkable.com/t/help-with-setting-up-app/3756531/2 "2025-07-19T13:30:17Z")

</div>

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.