# Group Malfunctioning?
**URL:** https://community.thunkable.com/t/group-malfunctioning/2195330
**Category:** Issues / Bugs
**Tags:** design
**Created:** [December 28, 2022, 6:57pm UTC](https://community.thunkable.com/t/group-malfunctioning/2195330 "2022-12-28T18:57:30Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@ringraith2](https://community.thunkable.com/u/ringraith2)
#### Post date: [December 28, 2022, 6:57pm UTC](https://community.thunkable.com/t/group-malfunctioning/2195330/1 "2022-12-28T18:57:30Z")
Hi there. I found with the “hard” way (as usual 😉) that when I put a Data Viewer List inside a Group in DnD designing mode and set this group to “Relative to Device”, the viewer goes to a loading loop mode until it crashes and shows no data from the assigned table.
In addition to the Group problem I found that when I also put a List Viewer inside it, it cannot change it’s height with the blocks. Whatever I tried it cannot change it’s height until I put it outside the Group, which then works as it should.
Is the “Group” component buggy for these situations, or is there a fix or a workaround?
Thanks in advance
---
### Author:  [@tatiang](https://community.thunkable.com/u/tatiang)
#### Post date: [December 28, 2022, 8:34pm UTC](https://community.thunkable.com/t/group-malfunctioning/2195330/2 "2022-12-28T20:34:09Z")
The height issue is discussed here and is a current bug:
> [@Why can't I change the height/width of a button inside a group?](https://community.thunkable.com/t/why-cant-i-change-the-height-weight-of-a-button-inside-a-group/2191081):
>
> In this screen capture video (no sound), you can see that I try to change the height and width of an image component in a DnD project and it keeps reverting back to the original dimensions. [https://watch.screencastify.com/v/kUtvGMKeDsZjiyZA48Wn](https://watch.screencastify.com/v/kUtvGMKeDsZjiyZA48Wn)
I’m not sure about the other issue you mentioned.
---
### Author:  [@ringraith2](https://community.thunkable.com/u/ringraith2)
#### Post date: [December 29, 2022, 12:33pm UTC](https://community.thunkable.com/t/group-malfunctioning/2195330/3 "2022-12-29T12:33:51Z")
@tatiang Thanks for your response. I temporarily fixed the issue with the List Viewer Height with setting Y as well and it’s working.
The Data Viewer List issue although remains. 🤨
---
### Author:  [@ioannis](https://community.thunkable.com/u/ioannis)
#### Post date: [November 8, 2024, 1:12pm UTC](https://community.thunkable.com/t/group-malfunctioning/2195330/4 "2024-11-08T13:12:36Z")