# Esp32 and dht11 weather station app

**URL:** <https://community.thunkable.com/t/esp32-and-dht11-weather-station-app/1920599>\
**Category:** BLE / BlueTooth\
**Created:** [June 11, 2022, 12:45pm UTC](https://community.thunkable.com/t/esp32-and-dht11-weather-station-app/1920599 "2022-06-11T12:45:36Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jared](https://sea1.discourse-cdn.com/flex015/user_avatar/community.thunkable.com/jared/32/138473_2.png) [@jared](https://community.thunkable.com/u/jared)\
**Post date:** [June 11, 2022, 12:45pm UTC](https://community.thunkable.com/t/esp32-and-dht11-weather-station-app/1920599/1 "2022-06-11T12:45:36Z")

</div>

> [@BlueTooth Weather Station - BLE](https://community.thunkable.com/t/bluetooth-weather-station/1918355):
>
> This project requires: [esp32 w/ ble](https://www.amazon.com/HiLetgo-ESP-WROOM-32-Development-Microcontroller-Integrated/dp/B0718T232Z/ref=sr_1_4?crid=2I87RJS4PR6IM&keywords=esp32+wroom&qid=1654807051&sprefix=esp32+wroom+%2Caps%2C83&sr=8-4)[arduino ide](https://www.arduino.cc/en/software)[esp extension for arduino ide](https://randomnerdtutorials.com/how-to-install-esp8266-board-arduino-ide/)[dht-11 sensor](https://www.amazon.com/Temperature-Humidity-Digital-3-3V-5V-Raspberry/dp/B07WT2HJ4F/ref=sr_1_3?crid=2OPPHSRJPWASZ&keywords=dht11&qid=1654807119&sprefix=dht11%2Caps%2C78&sr=8-3)[breadboard](https://www.amazon.com/Seamaka-Breadboards-Solderless-Distribution-Connecting/dp/B09ND3WTNY/ref=sr_1_7_sspa?crid=TY36YKUY63D8&keywords=mini+breadboard&qid=1654807139&sprefix=mini+bread+moard%2Caps%2C87&sr=8-7-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEySldTUFNTM1pYWTdYJmVuY3J5cHRlZElkPUEwNjU4NzIwMk5aUzJFNVkwSEZFUiZlbmNyeXB0ZWRBZElkPUEwOTU1MzA0MkFETUE0TDRZM0s4VyZ3aWRnZXROYW1lPXNwX210ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=) jumper wires thunkable [https://x.thunkable.com/projectPage/62a20fbda09dfa016f680c47](https://x.thunkable.com/projectPage/62a20fbda09dfa016f680c47) Once you upload the code to your esp32, connect your dht11 to power, grnd, and pin14, you’re set! restart the device, then fire up the thunkable app. connect your device and ensure the UUID’s are matching. from there you should be able to start reading directly from your device and display…

---

<div class="post-metadata">

**Author:** ![ioannis](https://sea1.discourse-cdn.com/flex015/user_avatar/community.thunkable.com/ioannis/32/146956_2.png) [@ioannis](https://community.thunkable.com/u/ioannis)\
**Post date:** [November 8, 2024, 1:13pm UTC](https://community.thunkable.com/t/esp32-and-dht11-weather-station-app/1920599/2 "2024-11-08T13:13:11Z")

</div>