# Buggy switch to Screen1

**URL:** <https://community.thunkable.com/t/buggy-switch-to-screen1/16400>\
**Category:** Questions about Thunkable X\
**Created:** [February 7, 2018, 7:22am UTC](https://community.thunkable.com/t/buggy-switch-to-screen1/16400 "2018-02-07T07:22:04Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![User81](https://avatars.discourse-cdn.com/v4/letter/u/ba9def/32.png) [@User81](https://community.thunkable.com/u/User81)\
**Post date:** [February 7, 2018, 7:22am UTC](https://community.thunkable.com/t/buggy-switch-to-screen1/16400/1 "2018-02-07T07:22:04Z")

</div>

Dear developers,

after I made a function component on Screen 2, I wanted to get the function component to start the function. Everytime I click on the function tab on the left the regular displaying is loaded for 2 seconds and then the Screen is automatically switched to Screen 1.  
I use Stack Navigator with two screens.

Can anybody confirm that it’s not possible to use functions on Screen2?

cheers,  
User81

---

<div class="post-metadata">

**Author:** ![User81](https://avatars.discourse-cdn.com/v4/letter/u/ba9def/32.png) [@User81](https://community.thunkable.com/u/User81)\
**Post date:** [February 8, 2018, 6:16am UTC](https://community.thunkable.com/t/buggy-switch-to-screen1/16400/2 "2018-02-08T06:16:31Z")

</div>

I found a workaround:

make the function-block and the corresponding start-function-block on Screen1 and use Ctrl-c and Ctrl-v to bring these two blocks to Screen2

---

<div class="post-metadata">

**Author:** ![ioannis](https://sea1.discourse-cdn.com/flex015/user_avatar/community.thunkable.com/ioannis/32/146956_2.png) [@ioannis](https://community.thunkable.com/u/ioannis)\
**Post date:** [November 8, 2024, 12:04pm UTC](https://community.thunkable.com/t/buggy-switch-to-screen1/16400/3 "2024-11-08T12:04:35Z")

</div>