# BLE Signal Strength Level (RSSI)

**URL:** <https://community.thunkable.com/t/ble-signal-strength-level-rssi/2755458>\
**Category:** Feature Requests\
**Tags:** design, help\
**Created:** [December 19, 2023, 5:49pm UTC](https://community.thunkable.com/t/ble-signal-strength-level-rssi/2755458 "2023-12-19T17:49:18Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![thunkable28](https://avatars.discourse-cdn.com/v4/letter/t/a9a28c/32.png) [@thunkable28](https://community.thunkable.com/u/thunkable28)\
**Post date:** [December 19, 2023, 5:49pm UTC](https://community.thunkable.com/t/ble-signal-strength-level-rssi/2755458/1 "2023-12-19T17:49:18Z")

</div>

Is there a way to get the Bluetooth strength (RSSI) value or does Thunkable has a roadmap to adding so? Will be really helpful for communication range testing and assessing the signal quality in general.

Thanks

---

<div class="post-metadata">

**Author:** ![matt\_conroy](https://sea1.discourse-cdn.com/flex015/user_avatar/community.thunkable.com/matt_conroy/32/150843_2.png) [@matt\_conroy](https://community.thunkable.com/u/matt_conroy)\
**Post date:** [December 19, 2023, 8:51pm UTC](https://community.thunkable.com/t/ble-signal-strength-level-rssi/2755458/2 "2023-12-19T20:51:17Z")

</div>

Thanks for reaching out about this. Unfortunately, it is not currently possible to retrieve that value with our current set of BLE blocks. I am going to change the category for this to Feature Request in case any other users are looking to do the same!

---

<div class="post-metadata">

**Author:** ![thunkable28](https://avatars.discourse-cdn.com/v4/letter/t/a9a28c/32.png) [@thunkable28](https://community.thunkable.com/u/thunkable28)\
**Post date:** [December 19, 2023, 9:23pm UTC](https://community.thunkable.com/t/ble-signal-strength-level-rssi/2755458/3 "2023-12-19T21:23:24Z")

</div>

Sounds good @matt_conroy.

Thanks

---

<div class="post-metadata">

**Author:** ![thunkable28](https://avatars.discourse-cdn.com/v4/letter/t/a9a28c/32.png) [@thunkable28](https://community.thunkable.com/u/thunkable28)\
**Post date:** [December 19, 2023, 9:26pm UTC](https://community.thunkable.com/t/ble-signal-strength-level-rssi/2755458/4 "2023-12-19T21:26:10Z")

</div>

Maybe this needs to be a separate thread of it’s own, but another feature that would be superb is ability to fetch and decode data in BLE connectionless/Beacon mode, which is a standard and readily available with native SDKs.

---

<div class="post-metadata">

**Author:** ![ioannis](https://sea1.discourse-cdn.com/flex015/user_avatar/community.thunkable.com/ioannis/32/146956_2.png) [@ioannis](https://community.thunkable.com/u/ioannis)\
**Post date:** [October 9, 2024, 7:31am UTC](https://community.thunkable.com/t/ble-signal-strength-level-rssi/2755458/5 "2024-10-09T07:31:29Z")

</div>

Hello @thunkable28  
Now this is possible! Check out our new BLE block in the update here: [V475/476 Release Notes - Announcements / Release Updates - Community (thunkable.com)](https://community.thunkable.com/t/v475-476-release-notes/3257300)

---

<div class="post-metadata">

**Author:** ![ioannis](https://sea1.discourse-cdn.com/flex015/user_avatar/community.thunkable.com/ioannis/32/146956_2.png) [@ioannis](https://community.thunkable.com/u/ioannis)\
**Post date:** [November 8, 2024, 1:33pm UTC](https://community.thunkable.com/t/ble-signal-strength-level-rssi/2755458/6 "2024-11-08T13:33:14Z")

</div>