# Android Broadcast Mechanism Access

**URL:** <https://community.thunkable.com/t/android-broadcast-mechanism-access/1579652>\
**Category:** Questions about Thunkable X\
**Created:** [October 25, 2021, 8:35am UTC](https://community.thunkable.com/t/android-broadcast-mechanism-access/1579652 "2021-10-25T08:35:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![inspiredchoice70a](https://avatars.discourse-cdn.com/v4/letter/i/5e9695/32.png) [@inspiredchoice70a](https://community.thunkable.com/u/inspiredchoice70a)\
**Post date:** [October 25, 2021, 8:35am UTC](https://community.thunkable.com/t/android-broadcast-mechanism-access/1579652/1 "2021-10-25T08:35:10Z")

</div>

Is there a way to access the internal Android Broadcast Mechanism.

Upon opening and closing my app I wish to alter settings on the device that controls the barcode scanner settings.

The device hardware manufacturer provides API documentation for this, however I cannot see this as an option in Thunkable unless I can use the web API block in some way?

Any ideas?

Many thanks.

---

<div class="post-metadata">

**Author:** ![muneer](https://sea1.discourse-cdn.com/flex015/user_avatar/community.thunkable.com/muneer/32/75210_2.png) [@muneer](https://community.thunkable.com/u/muneer)\
**Post date:** [October 25, 2021, 9:19am UTC](https://community.thunkable.com/t/android-broadcast-mechanism-access/1579652/2 "2021-10-25T09:19:28Z")

</div>

If your hardware manufacturer provides API to control the settings your are asking for then `Web API` component is the way to go.

Of course the settings of the `Web API` will depends on the guidelines set out in the documentations.

---

<div class="post-metadata">

**Author:** ![ioannis](https://sea1.discourse-cdn.com/flex015/user_avatar/community.thunkable.com/ioannis/32/146956_2.png) [@ioannis](https://community.thunkable.com/u/ioannis)\
**Post date:** [November 8, 2024, 1:14pm UTC](https://community.thunkable.com/t/android-broadcast-mechanism-access/1579652/3 "2024-11-08T13:14:37Z")

</div>

Closed on November 8, 2024, 1:14pm UTC


